Read Our Blog

Tile, Grout, Stone Cleaning & Sealing

Hard surface floors have different types of geology and construction. It is absolutely crucial that each floor is cared for uniquely. The Clean Team is familiar with these specifications and is interested in helping our clients with the proper cleaning methods. This guide is designed to provide our clients with a basic introduction to the cleaning and restoration of hard surface floors. All hard floors can be divided into two categories, natural and synthetic.

The Clean Team has cutting edge technology that will produce cleaning results on your tile and grout like never before. When cleaning any stone floor we use the most scientifically advanced cleaning products, no acids, no strippers, and no harsh chemicals. The floor is then machine or hand scrubbed. Finally, our state-of-the art system is used, to remove all dirt, soil, & grime achieving maximum soil removal and best overall cleaning results.

Our 8 Step Tile & Grout Cleaning Process

Step 1: Pre-Inspection
Our technician will make note of all challenging areas and set your expectations, as well as come up with a solution for each area.
Step 2: Area Preparation
We will prepare the areas surrounding the tile, making sure not to disturb any carpeted or hardwood floors.
Step 3: Dry soil removal
Our technicians thoroughly sweep and vacuum the entire area, maximizing the results we obtain. As in any cleaning process, dry soil removal is the most important.
Step 4: Soil Suspension

We use the highest quality products. The cleaning agent sprayed over the entire surface of your tile or stone is the most scientifically advanced cleaner on the market.
Step 5: Cleaning
Complex and difficult areas are agitated manually with a brush. The entire floor is then cleaned using a state of the art pressure cleaning system.
Step 6: Rinsing
A rinse solution is pumped through the machine during the cleaning process to help balance the pH of your floor.
Step 7: Sealing/Finishing
The type of sealer and application varies depending on the surface which it is being applied.
Step 8: Post-inspection
Technicians will initiate a walk through and go over results before leaving.

Benefits of Sealing Your Grout

Tile and Grout Sealer helps provides long-lasting protection for grout lines, and for porous stone and tile. Penetrates deep into the surface to repel everyday dirt and grease, as well as food spills and stains. The latest fluoropolymer ingredients effectively seal the surface, making routine cleaning and maintenance easier. Water-based formula allows for fast convenient application.

Features:

Seals and protects grout, and porous tile and stone.
Penetrates surface to repel dirt, grease and stains.
Protects with advanced fluoropolymer technology.
Water-based for fast, easy application.

Sealer cures well after 3 to 4 hours, and completely within 24 hours. If entire floor is treated, keep area closed to foot traffic for at least 8 hours, until sealer has had a chance to cure.

Longevity: Clean up food and liquid spills as soon as possible. Re-application is recommended after a period of 12 months, or when grout or tile begins to visibly absorb moisture immediately after liquid contact.

The Clean Team is an IICRC (Institute of Inspection Cleaning and Restoration Certification) certified firm. We hold multiple Master & Journeyman Cleaning Technician designations (the highest available in the carpet cleaning industry).

The Clean Team
IICRC CERTIFIED MASTER TEXTILE CLEANERS
TCT Inc., 45 Pembroke Street (Route 27), Kingston MA 02364
In-Plant Facility & Office Hours: Monday - Friday 9:00 a.m. - 5:00 p.m., or by appointment.
Phone: 781-585-4678 ~ Fax: 781-585-4684
Estimates also available over the telephone or email.